AWS A5.10 ER5356 Solid wire
TEMO ER5356, GB/T SAl 5356
Description:
ER5356 is an Al-Mg alloy welding wire is mainly used where higher weld strength and grater ductility is required. ER5356 has grater resistance to corrosion (salt water) and better color match after anodizing. DC Reversed Polarity connection. Argon shielding gas is required..
Diameters: Packaging:
0.8mm-4.0mm 0.5kg, 1kg, 2kg, 5kg, 7kg
Applications:
Mainly used for welding 5xxx series alloys.
Chemical Composition of Deposited Metal (wt.%):
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | Be | |
AWS | ≤0.25 | ≤0.40 | ≤0.10 | 0.05-0.20 | 4.5-5.5 | 0.05-0.20 | ≤0.10 | 0.06-0.20 | allowance | ≤0.0003 |
GB/T | ≤0.25 | ≤0.40 | ≤0.10 | 0.05-0.20 | 4.5-5.5 | 0.05-0.20 | ≤0.10 | 0.06-0.20 | allowance | ≤0.0003 |
Example value | 0.05 | 0.14 | 0.07 | 0.16 | 4.86 | 0.06 | 0.006 | 0.10 | allowance | 0.0001 |
Mechanical Properties of Deposited Metal:
Tensile strength /MPa | Yield strength /MPa | Elongation /% | Impact J/℃ | |
AWS | ≥240 | -- | -- | -- |
GB/T | ≥250 | ≥120 | ≥18 | -- |
Example value | 265 | 135 | 27 | -- |
Weld X - ray Flaw Detection: GradeⅡ
Recommended welding parameters(DC﹢):
Diameter /mm | φ0.8 | φ0.9 | φ1.0 | φ1.2 | φ1.6 |
Current /A | 60-170 | 60-170 | 90-210 | 140-260 | 190-350 |
Voltage/V | 13-24 | 13-24 | 15-26 | 20-29 | 25-30 |
Notes:
1. Before welding, impurities such as rust, oil stains, and moisture must be removed from the welded parts.
2. Shielded gas: 100%Ar or 75%Ar+25%He or 50%Ar+50%He.
3. In order to get good welding bead, weld on thick plate should be preheat 100-200℃ before welding.
